Basic Types There are two basic types of mobile elevating work platforms (MEWPs):
1. Scissor Lift
2. Boom Lift
Both types share three major components:
1. Base
2. Lifting mechanism
3. Platform assembly.
Both types come in:
• On-slab models for use on smooth hard surfaces such as concrete or pavement - Not designed for uneven or sloping ground - Normally have solid rubber tires - Generally powered by rechargeable DC battery - Some powered by internal combustion engine, either gasoline or propane - Most have "pothole protection"—a metal plate lowered close to the ground to afford some protection against inadvertent movement into depressions or debris.
• Rough-terrain models for use on firm level surfaces such as graded and compacted soil or gravel. - Similar in design to on-slab machines - Built to handle rigorous off-slab challenges - Normally have wider wheel bases, larger wheels, and pneumatic tires - Some fitted with outriggers for extra stability - Usually powered by internal combustion engines, gasoline, diesel, or propane - DC units also available but not common - Lifting mechanism is hydraulic

Scissor Lift

Type Machines These are raised and lowered by hydraulic pistons and an expanding scissor mechanism. Platforms are available in various configurations with different capabilities for extension and movement. Some have extendable platforms or platforms that can rotate. Extendable platforms should be retracted before raising or lowering the device.
Self-Propelled Boom-Supported Platforms
• Normally fitted with rough-terrain undercarriages
• Some smaller on-slab units
• Platforms have lifting capacity of about 227 kg (500 pounds) or two workers
• Lack capacity of scissor-type machines
• Usually powered by an internal combustion engine, gasoline, diesel, or propane.

Booms

• Telescopic, articulating, or combination of both
• Raised and extended by hydraulic cylinders
• Can extend well beyond the wheelbase. controls are fixed in position; the operator may become disoriented by machine rotation and must remain aware of the direction of movement. Many machines have color-coded directional arrows to help the operator move the machine in the right direction. As with mobile cranes, stability decreases with length of boom and boom angle as the Centre of gravity moves in relation to the platform position. The machine will overturn if the center of gravity moves outside the machine’s base. All MEWPs must be inspected every six months by a third party who are approved and qualified to do so. The third-party engineer must inspect the MEWP through visual and function testing as required and not rely on the operator for the function tests.t Here

Booking and inquires.
B Safe Safety & Security Consultancy Certified Inspectors have been independently evaluated and certified to inspect all type of MEWP, regardless of make, model or manufacturer.
We are known for our competitive pricing, flexible scheduling, and punctual timings, for any requests or inquires do not hesitate to contact us.

Contact US



Potable Water Tank Inspection​

What is a Potable water tank

Potable water tanks are water storage tanks holding drinkable water, these tank shall comply with the rules and regulations of the food safety department of Dubai municipality.

As per a recent circulation sent from Dubai municipality, all the water tanks in schools, hotels, and commercial buildings, such as malls and tourist attractions, shall be considered as potable water tank, this is to push the vision of having drinkable tap water in Dubai.

 

What are the common types of Potable water tanks

There are various types of water tanks covered by the guideline, namely;

·        Reinforced Cement Concrete Tanks “RCC Tanks”:

§  RCC tanks are typically used in the basement/ground level, and are used to store the raw DEWA water and sometimes the filtered and chilled water in the ground level.

·        Glass-Reinforced Plastic panels Tank “GRP Tanks”:

§  GRP Tanks can be used at the ground level as well as at the upper levels to store the water prior to the distribution, they are the most common type of tanks found for water storage purposes.

·        Plastic Tanks:

§  Typically used at schools due to the price point, we’ve observed that these tanks age poorly and generally require replacing after few years of service.

·        Galvanized Tanks:

§  Steel tanks are rarely used for storing potable water.

 

Do you have to get your water tanks inspected?

Yes! Recently Dubai Municipality announced Circular Ref. No. DM-FSD-CR01 related to Drinking Water Tanks Inspection. Whereas Dubai Municipality Food Safety Directorate – Drinking Water Control Unit issued new water system monitoring and inspection guidelines. The scope of implementation covers the following: schools, residential, commercial buildings, universities, government buildings, hospitals, mosques, public buildings and factories with sources of un-bottled water.

The new guideline requests the owners or operators of all Dubai-based premises, from the categories mentioned, to obtain a conformity certificate for all of the domestic water tanks in every facility, except the private villas. The guideline includes a list of legal action which will be taken by DM against noncompliant parties.

B Safe Safety is an accredited inspection body. Hence, obtaining our certification for the domestic water tanks will waive any fines and problems that you may face during the routine Dubai municipality visits.

What we are checking during the inspection.

The third party inspection for potable water tanks is mainly consisting of two parts;

·        Chemical properties of the water:

o   This includes the pH level, TDS value, chlorine concentration, bromate level, and Escherichia coli test.

·        Physical condition of the tank:

o   This will observe if the tanks’ physical condition is complying with the regulations, checking for rust, cracks, uncovered openings, etc.

 

Documentation & Reporting.

Upon the completion of the inspection and the finishing up the lab results an initial report will be issued, and a follow up email will be sent to the client.

Then, assuming everything is satisfactory, a certificate will be issued. The certificate is valid for 1 year after the inspection.

In case the tank was not satisfactory, we will provide assistance for explaining the problem as well as the corrective actions, and a re-inspection shall be conducted after rectification.

Here at B Safe Safety, our certificates and initial reports are made to be easy to understand, simplicity and accuracy are our aim when it comes to certification and documentation.

B Safe Safety is an authorized body for analysis, inspection, and certification services in UAE.

Booking and inquires.

We ensure the potable water tanks undergoing our safety inspection are complying with the requirements of the food safety department.

We adhere to local regulations without compromising our thought out flexibility, this ensures that you will evade any issues with the local authorities so long you have obtained our certification.

We are known for our competitive pricing, flexible scheduling, and punctual timings, for any requests or inquires do not hesitate to contact us.